英语翻译PREP7 K,1,-60,0,0,K,2,-60,50,0,K,3,-99.5,50,0,K,4,-99.5,0,0,K,5,-100.5,10,0,K,6,-100.5,60,0,K,6,-140,60,0,K,7,-140,10,0,K,8,-100.5,60,0,K,8,-100.5,60,0,FLST,2,4,3 FITEM,2,6 FITEM,2,8 FITEM,2,5 FITEM,2,7 A,P51X FLST,2,4,3 FITEM,2,3 FITEM,2

英语翻译PREP7 K,1,-60,0,0,K,2,-60,50,0,K,3,-99.5,50,0,K,4,-99.5,0,0,K,5,-100.5,10,0,K,6,-100.5,60,0,K,6,-140,60,0,K,7,-140,10,0,K,8,-100.5,60,0,K,8,-100.5,60,0,FLST,2,4,3 FITEM,2,6 FITEM,2,8 FITEM,2,5 FITEM,2,7 A,P51X FLST,2,4,3 FITEM,2,3 FITEM,2 英语翻译/PREP7 ET,1,beam4 MP,EX,1,3E5 MP,DENS,1,7.8e-9 R,1,7775,5e6,5e6,100,100 我用的Ansys 12.0,怎么用命令流做一条有十个周期的正弦曲线?*AFUN,RAD/PREP7*do,i,0,100,1*SET,x,0.1*i*SET,y,sin(0.1*i)k,i+1,x,y*enddo*do,j,1,100,1l,j,j+1*enddo 这个命令流只能有一个周期的正弦曲线~ ansys命令流能给出它的GUI吗/units,SI /prep7 et,1,beam4 r,1,2.131e-3,612e-9,6094e-9,0.14,0.06 mp,ex,1,2e11 mp,prxy,1,0.3 mp,dens,1,7800 k,1,0,0 k,2,10,0 k,3,5,2 l,1,2 latt,1,1,1,3 lesize,all,20 lmesh,all /eshape,1 eplot dk,1,all,0 fk,2,fy,-1e4 ansys中平移且旋转工作平面后,无法正常画出椭圆?finish/clear/PREP7 wprota,80.6 wpoffs,8.09,CSWPLA,11,1,0.5,1K,1,-1K,2,1L,1,2该命令流无法正常画出椭圆,但是去掉wpoffs或wprota任意一句后,都可以正常画出椭圆, ANSYS命令流 ,还有编程的思想能写上点也好 分不够可以加 /PREP7 ET,1,BEAM4 KEYOPT,1,2,0KEYOPT,1,6,0KEYOPT,1,7,1KEYOPT,1,9,0KEYOPT,1,10,0 *SET,p,acos(-1)*SET,R1,5*SET,R2,60 R,1,p*R1**2,p*R1**4/4,p*R1**4/4,2*R1,2*R1,,RMORE,,p*R1**4/2, 英语翻译/FILNAME,ALU-MIR/TITLE,THE ANALYSIS OF THE ALU-MIRROR /UNITS,SI *SET,d,0.055 *SET,H1,0.02 *SET,R,0.2587 *SET,H2,H1+SQRT(R*R-d*d)-R *SET,NH,1E-4 /PREP7 ET,1,SOLID5ET,2,SHELL131 MP,KXX,1,121 MP,DENS,1,2650 MP,C,1,921 MP,EX,1,7.1E11 MP,ALPX, ANSYS 施加应力 查看变形FINISH/CLEAR/FILENAME,YINGLICESHI,1/PREP7/TITLE,FORCE ET,1,PLANE42MP,EX,1,3.08e6 MP,PRXY,1,0.3 RECTNG,0,5,0,0.3aatt,1,1smrtsize,1amesh,allallsel,allsavefinish/soluantype,staticlsel,s,loc,0dl,all,1,ux,0dl,all,1,uy,0ksel, ANSYS命令流 ET,1,PLANE42et,2,hyper56MPTEMP,MPTEMP,1,0 MPDATA,EX,1,2.1E5 MPDATA,PRXY,1,0.3 /PREP7 MPTEMP,MPTEMP,1,0 MPDE,EX,1 MPDE,PRXY,1 MPDATA,EX,1,2.1E+005 MPDATA,PRXY,1,0.3 MPTEMP,MPTEMP,1,0 MPDATA,EX,2,69 MPDATA,PRXY,2,0.49 MPTEMP,MPTEMP,1,0 M 请 帮忙 解释下 ANSYS 程序 命令流esel,s,mat,1 !假设单元材料号为1,先选择单元 *get,enum1,elem,0,count *get,el,elem,0,num,min ksel,all *get,nkp1,kp,0,num,max ksel,none asel,none vsel,none /post1 set,last /prep7 SHPP,OFF UPGEOM,1, ANSYS拉索模态分析频率为0拉索1.前处理/filname,cable 定义工作文件名/title,anslysis of cable 定义工作标题/prep7 进入前处理处理器et,1,link10 定义单元类型r,1,0.01,0.0001 定义实常数面积+初应变type,1mp,ex,1 英语翻译begin k:=100; 10:if k>i+j thenbegin k:=k-1;goto 10;end else k:=i*i-j*j;i:=0;j:=0; end ansys 地震波输入FINISH /CLEAR /PREP7 T1=0.02H=0.6B=0.2L=0.2N=1500ET,1,SHELL163 KEYOPT,1,1,2R,1,1,T1 EDMP,RIGI,1,3,7 MP,DENS,1,2500 MP,EX,1,7.2e10MP,NUXY,1,0.25 MP,DENS,2,450 MP,EX,2,1.627E9MP,PRXY,2,0.47 MP,DMPR,0.6EDMP,RIGI,2,0,0N,1,-L*2,0,-L*2 |k-1|-k+1=0 k取值范围 2k*3+3k*2+k-1=0 4K方-K-1=0 k等于多少 1/(k^2+k),k>0的最大值怎么算 k>0 求K^2+1/4K 的最小值